Reference

Iowa API county codes

Every Iowa API well number starts with 14, the state code. The next three digits are the county code, one of the 99 listed below, so a number beginning 14-001 belongs to a well in Adair County.

To decode a whole number, including the sidetrack and completion digits, paste it into the API well number decoder.

How to read a Iowa API number

14State: Iowa
001County: Adair
12345Well, unique within the county

The first ten digits identify one well. Two more digits can follow for a sidetrack, and two after that for a later completion. The county is the one where the well starts at the surface, so a horizontal well that crosses a county line keeps its surface county's code. A few state regulators assign the producing county instead, so the state record is the final word on a well near a boundary.

All 99 Iowa counties

County code County API numbers start
001 Adair 14-001-
003 Adams 14-003-
005 Allamakee 14-005-
007 Appanoose 14-007-
009 Audubon 14-009-
011 Benton 14-011-
013 Black Hawk 14-013-
015 Boone 14-015-
017 Bremer 14-017-
019 Buchanan 14-019-
021 Buena Vista 14-021-
023 Butler 14-023-
025 Calhoun 14-025-
027 Carroll 14-027-
029 Cass 14-029-
031 Cedar 14-031-
033 Cerro Gordo 14-033-
035 Cherokee 14-035-
037 Chickasaw 14-037-
039 Clarke 14-039-
041 Clay 14-041-
043 Clayton 14-043-
045 Clinton 14-045-
047 Crawford 14-047-
049 Dallas 14-049-
051 Davis 14-051-
053 Decatur 14-053-
055 Delaware 14-055-
057 Des Moines 14-057-
059 Dickinson 14-059-
061 Dubuque 14-061-
063 Emmet 14-063-
065 Fayette 14-065-
067 Floyd 14-067-
069 Franklin 14-069-
071 Fremont 14-071-
073 Greene 14-073-
075 Grundy 14-075-
077 Guthrie 14-077-
079 Hamilton 14-079-
081 Hancock 14-081-
083 Hardin 14-083-
085 Harrison 14-085-
087 Henry 14-087-
089 Howard 14-089-
091 Humboldt 14-091-
093 Ida 14-093-
095 Iowa 14-095-
097 Jackson 14-097-
099 Jasper 14-099-
101 Jefferson 14-101-
103 Johnson 14-103-
105 Jones 14-105-
107 Keokuk 14-107-
109 Kossuth 14-109-
111 Lee 14-111-
113 Linn 14-113-
115 Louisa 14-115-
117 Lucas 14-117-
119 Lyon 14-119-
121 Madison 14-121-
123 Mahaska 14-123-
125 Marion 14-125-
127 Marshall 14-127-
129 Mills 14-129-
131 Mitchell 14-131-
133 Monona 14-133-
135 Monroe 14-135-
137 Montgomery 14-137-
139 Muscatine 14-139-
141 O'Brien 14-141-
143 Osceola 14-143-
145 Page 14-145-
147 Palo Alto 14-147-
149 Plymouth 14-149-
151 Pocahontas 14-151-
153 Polk 14-153-
155 Pottawattamie 14-155-
157 Poweshiek 14-157-
159 Ringgold 14-159-
161 Sac 14-161-
163 Scott 14-163-
165 Shelby 14-165-
167 Sioux 14-167-
169 Story 14-169-
171 Tama 14-171-
173 Taylor 14-173-
175 Union 14-175-
177 Van Buren 14-177-
179 Wapello 14-179-
181 Warren 14-181-
183 Washington 14-183-
185 Wayne 14-185-
187 Webster 14-187-
189 Winnebago 14-189-
191 Winneshiek 14-191-
193 Woodbury 14-193-
195 Worth 14-195-
197 Wright 14-197-

County names are the US Census names for these codes. The API standard does not promise the two match, so we checked them against state well records. Across 35 states, where this table names a county it matched the one the agency recorded on 85,091 of 85,100 wells. Offshore state and federal waters use their own pseudo-county codes, which are not listed here.

Finding the well itself

The API number stops at the county. It does not hold the well's coordinates, lease, survey section or operator. Those sit in the well record, which you find by searching the full number in the state agency's system. Search it at the Iowa oil and gas regulator.

Frequently asked questions

What is the API state code for Iowa?

14. API state codes run alphabetically from 01 for Alabama to 49 for Wyoming, then 50 for Alaska and 51 for Hawaii. They are not the Census FIPS state codes, which is a common source of wrong lookups.

How do I find the county from a Iowa API number?

Read digits three to five and find them in the table on this page. In 14-001-12345, the county code is 001, which is Adair County. If the code is missing from the table, it is usually an offshore area rather than an onshore county.

Does a Iowa API number give the well's exact location?

No. The number stops at the county. Coordinates, the lease and the survey location are in the well record held by the state agency, which you search with the full API number.

State codes: American Petroleum Institute Bulletin D12A well numbering standard. County names: US Census county FIPS names, checked against state well records. Reference generated .

How to cite this page

Sources: American Petroleum Institute Bulletin D12A well numbering standard; US Census county FIPS codes.

TetraSoft. (2026). Iowa API county codes. Reference generated 2026-09-24. https://tetrasoftco.com/tools/api-county-codes/iowa/